Manuals / Energy Speaker Systems / TV and Video / Flat Panel Television

Energy Speaker Systems LTV46DA manual Unpacking and Setup

Models: LTV46DA

1 48

Download 48 pages 42.95 Kb

Page 7

Unpacking and Setup

•Only use suitable stands, supports, carts or tables that ensure the unit does not tip over.

If you place the unit on a cart, move it with caution to prevent injuries or damage resulting from tip-over.

•Unplug the unit during lightning storms or if you will not use it for a longer period of time.

•Refer all servicing to qualified service personnel only. Servicing is required if the unit has been damaged, e.g. if the power cable or power plug are damaged, if liquid or objects entered the unit, it it was subject to rain or any other kind of humidity, if it has been dropped or if it does not operate properly.

•Safety instructions to handle the battery - to prevent leakage of the batteries and related health hazards or damage to material follow the instructions below:

-Mind the polarity of the batteries (+/-) when inserting. Use only similar batteries (manufacturer, carbon, alkaline, old, new) together.

-Remove the batteries, if you will not use the unit for a longer period.

•To avoid electric shock or fire, do not expose the unit to rain or humidity.

•Do not expose the unit to dripping or splashing water. Do not place any container with liquids (beverages, vases etc.) on the unit.

•Do not place any open fire (candles etc.) on the unit.

•If you use an outdoor antenna, make sure to ground the antenna to provide protection against voltage surges and build up of static charges.

•If you do not operate the unit in the Federal Republic of Germany, make sure to observe the local laws and regulations applicable in your country.

This symbol indicates additional safety instructions in the text.

This symbol indicates instructions to facilitate the operation.

5

English

Image 7

Energy Speaker Systems LTV46DA manual Unpacking and Setup

Contents

LTV46DA Page Content Reduce Noise Channel Groups Disposal ConformityScope of Supply Unpacking and SetupSafety Unit Remote control Batteries Mains cableUnpacking and Setup Intended purpose LocationFront View Viewing the Control PanelsRear View Remote Control Connections for TV Reception Connecting to a Device with Scart SocketConnecting to two Devices with Scart Socket Connections and Start of OperationConnecting to a Device without Scart Socket Connecting to the Roof AerialConnecting Camcorders and Video Games by AV Cable Connecting to Cable ReceptionConnecting to Headphones Connecting Camcorders and Video GamesConnecting Camcorders and Video Games by Scart Cable Connecting Camcorders and Video Games by S-Video CableWith the output sockets of the external devices Connecting to External Devices with Component Input Connecting to a ComputerAV 3 or AV 4 on the television set Connecting to the Hdmi Connection Connecting the Digital Audio OutputConnecting Several Devices Connecting Mains CableInserting the Batteries Connecting HDMI/DVI CableSetting up for Operation SettingsSwitching On Switching OffPress TuningStarting Automatic Tuning TV Stations Open, Select and Close MenusUse this function to set the channel for individual stations Change channelSet System Set Colour SystemPress . To return to the main menu, press Several times Fine Tuning Manual TuningUse this function to tune the channels manually Press or Select Name Sound SettingsChange Channel Name Unit can record and play back stereo soundsAdjust the settings Press to save the settings Improve Signal QualityUse this function to improve poor signal quality Press Select Install orUse this function to reduce picture noise Reduce NoiseChannel Groups Watch Favourite ChannelSet Aspect Ratio Set Screen LanguageSet Wide Screen Format Display if no Wide Screen Signal is Received Set Picture ModeSet Individual Colour Channels Additional Picture SettingsPress to open the desired menu Set Balance Audio SettingsAdjust Individual Audio Frequencies Set volumeIs a registered trademark Adjust Medium and Low FrequenciesSet Sound Source Enter the time using the key pad Press to save the settingsSet Time Press Select on or OFF or Set Switch on TimeUse this function to set a time when the unit turns on Set Time by StationUse this function to set a time when the unit turns off Set Switch off TimeAutomatic Switch off Automatic Switch off if no Signal is ReceivedSet On-Screen Display Switch Off if no Key is PressedSet Duration Set Transparency Child LockActivate Child Lock Set Characters for Teletext Restore DefaultSettings for the Computer Press Press the mains switch on the back of the unitWatching Set VolumeWatch Current Television Program Press Press repeatedly until you select the desired channel Recall a Favourite ChannelSelect Source Select InputWatch Two Programs at the Same Time PIP Use this function to set the size of the small picture Set Picture-in-Picture SizeSet Picture-in-Picture Position TeletextShow Time Set Picture Mode while WatchingAdjust Picture Size while Watching Still PictureUse this function to set the sound effects Set Sound Effect while WatchingSet Sound while Watching Set Stereo/Mono while WatchingCleaning and Troubleshooting Cannot be displayed. Change the settings in the computer Cast in black and white. Adjust the colour settingsSee chapter Restore Default on Check wether the connecting cable is properly connected to1360 x Technical specificationsPixel Type Pb/PrMemo Memo Memo