Additional Picture Settings | Energy Speaker Systems LTV46DA

Settings

➣Additional Picture Settings

Use this functions to adjust the picture settings individually, if you have selected the picture mode Custom.

Picture

Audio

Timer

Install

Setup

Option

ModeStandard

Brightness050

Contrast050

Sharpness050

Colour050

Tint050

Colour Temperature

1Press . To return to the main menu, press

several times.

2	Press	or	and select PICTURE.
3	Press	or	to select the desired menu.

4Press to open the desired menu.

5 Press

or

to select the desired setting.

6Press to save the settings. The settings will be saved in the picture mode Custom.

Position OK: SelectMENU/EXIT: Exit

The following settings are available:

Brightness: Brightness of the picture

Contrast: Contrast of the picture

Sharpness: Sharpens the edges of the objects

Colour:	Adjusts the intensity of the colours
Tint:	Sets the hue

➣Set Individual Colour Channels

Use this function to adjust the intensity of the individual colour channels.


		Picture	Audio		Timer		Install	Setup	Option

		Mode	Standard

		Brightness	050

		Contrast	050

		Sharpness	050

		Colour	050

		Tint	050
					Colour Temperature
		Colour Temperature			Colour Temperature
					Temperature
					Red		50
					Green		50
					Blue		50

1Press . To return to the main menu, press

several times.

2	Press	or	and select PICTURE.
3	Press	or	and select COLOUR

TEMPERATURE.

4Press .

5 Press or

to select the desired setting.

6Press to save the settings.

The following settings are available: Red/Green/Blue

Move

Adjust

MENU: Previous

EXIT: Exit

26

Image 28

Energy Speaker Systems LTV46DA Additional Picture Settings, Set Individual Colour Channels, Press to open the desired menu

Contents

LTV46DA Page Content Reduce Noise Channel Groups Conformity Disposal Unpacking and Setup SafetyUnit Remote control Batteries Mains cable Scope of Supply Unpacking and Setup Location Intended purpose Front View Viewing the Control PanelsRear View Remote Control Connecting to a Device with Scart Socket Connecting to two Devices with Scart SocketConnections and Start of Operation Connections for TV Reception Connecting to the Roof Aerial Connecting to a Device without Scart Socket Connecting to Cable Reception Connecting to HeadphonesConnecting Camcorders and Video Games Connecting Camcorders and Video Games by AV Cable Connecting Camcorders and Video Games by Scart Cable Connecting Camcorders and Video Games by S-Video CableWith the output sockets of the external devices Connecting to External Devices with Component Input Connecting to a ComputerAV 3 or AV 4 on the television set Connecting the Digital Audio Output Connecting Several DevicesConnecting Mains Cable Connecting to the Hdmi Connection Connecting HDMI/DVI Cable Inserting the Batteries Settings Switching OnSwitching Off Setting up for Operation Tuning Starting Automatic Tuning TV StationsOpen, Select and Close Menus Press Change channel Use this function to set the channel for individual stations Set System Set Colour SystemPress . To return to the main menu, press Several times Fine Tuning Manual TuningUse this function to tune the channels manually Sound Settings Change Channel NameUnit can record and play back stereo sounds Press or Select Name Improve Signal Quality Use this function to improve poor signal qualityPress Select Install or Adjust the settings Press to save the settings Reduce Noise Channel GroupsWatch Favourite Channel Use this function to reduce picture noise Set Aspect Ratio Set Screen LanguageSet Wide Screen Format Set Picture Mode Display if no Wide Screen Signal is Received Set Individual Colour Channels Additional Picture SettingsPress to open the desired menu Audio Settings Adjust Individual Audio FrequenciesSet volume Set Balance Adjust Medium and Low Frequencies Is a registered trademark Set Sound Source Enter the time using the key pad Press to save the settingsSet Time Set Switch on Time Use this function to set a time when the unit turns onSet Time by Station Press Select on or OFF or Set Switch off Time Automatic Switch offAutomatic Switch off if no Signal is Received Use this function to set a time when the unit turns off Set On-Screen Display Switch Off if no Key is PressedSet Duration Set Transparency Child LockActivate Child Lock Restore Default Settings for the ComputerPress Press the mains switch on the back of the unit Set Characters for Teletext Watching Set VolumeWatch Current Television Program Recall a Favourite Channel Select SourceSelect Input Press Press repeatedly until you select the desired channel Watch Two Programs at the Same Time PIP Set Picture-in-Picture Size Set Picture-in-Picture PositionTeletext Use this function to set the size of the small picture Set Picture Mode while Watching Adjust Picture Size while WatchingStill Picture Show Time Set Sound Effect while Watching Set Sound while WatchingSet Stereo/Mono while Watching Use this function to set the sound effects Cleaning and Troubleshooting Cast in black and white. Adjust the colour settings See chapter Restore Default onCheck wether the connecting cable is properly connected to Cannot be displayed. Change the settings in the computer Technical specifications Pixel TypePb/Pr 1360 x Memo Memo Memo