Set Colour System, Set System | Energy Speaker Systems LTV46DA

Settings

0

Set Colour System

Use this function to set the television signal to your national television standard.

These settings are made automatically by the automatic tuning function.

You should only change the settings described in this section, if you are familiar with the reception of television signals.

English

Picture Audio Timer

Colour

Auto

PAL

SECAM

NTSC

	Install		Setup		Option

	Auto Tuning			Italy

	Programme			12

	Colour			PAL

	System				BG

	Manual Tuning			S23

	Fine Tuning		217.25

	Name			S23

	Sound		Stereo / Dual 1

	Weak Signal Boost				Off

	Programme Edit

1Press . To return to the main menu, press

several times.

2	Press	or	and select INSTALL.
3	Press	or	and select COLOUR.

4Press .

5 Press or to select the desired setting.

6 Press	to save the settings.
The following settings are available:
Auto, PAL, SECAM, NTSC
The automatic tuning function sets the unit

Move

OK: Select

MENU: Previous

EXIT: Exit

automatically to the received signal. This is

why the menu item AUTO cannot be selected.

Set System

Use this function to set the sound signal to your national television standard.

These settings are made automatically by the automatic tuning function.

You should only change the settings described in this section, if you are familiar with the reception of television signals.

Picture Audio Timer

System

BG

DK

i

L

L’

M

		Install		Setup		Option

		Auto Tuning			Italy

		Programme			12

		Colour			PAL

		System			BG

		Manual Tuning			S23

		Fine Tuning		217.25

		Name			S23

		Sound		Stereo / Dual 1

		Weak Signal Boost				Off

		Programme Edit

1Press . To return to the main menu, press

several times.

2	Press	or	and select INSTALL.
3	Press	or	and select SYSTEM.

4Press .

5 Press or to select the desired setting.

6Press to save the settings.

The following settings are available: BG, DK, I, L, L’, M

Move

OK: Select

MENU: Previous

EXIT: Exit

19

Image 21

Energy Speaker Systems LTV46DA Set Colour System, Set System, Press . To return to the main menu, press Several times

Contents

LTV46DA Page Content Reduce Noise Channel Groups Disposal Conformity Safety Unpacking and SetupUnit Remote control Batteries Mains cable Scope of Supply Unpacking and Setup Intended purpose Location Viewing the Control Panels Front ViewRear View Remote Control Connecting to two Devices with Scart Socket Connecting to a Device with Scart SocketConnections and Start of Operation Connections for TV Reception Connecting to a Device without Scart Socket Connecting to the Roof Aerial Connecting to Headphones Connecting to Cable ReceptionConnecting Camcorders and Video Games Connecting Camcorders and Video Games by AV Cable Connecting Camcorders and Video Games by S-Video Cable Connecting Camcorders and Video Games by Scart CableWith the output sockets of the external devices Connecting to a Computer Connecting to External Devices with Component InputAV 3 or AV 4 on the television set Connecting Several Devices Connecting the Digital Audio OutputConnecting Mains Cable Connecting to the Hdmi Connection Inserting the Batteries Connecting HDMI/DVI Cable Switching On SettingsSwitching Off Setting up for Operation Starting Automatic Tuning TV Stations TuningOpen, Select and Close Menus Press Use this function to set the channel for individual stations Change channel Set Colour System Set SystemPress . To return to the main menu, press Several times Manual Tuning Fine TuningUse this function to tune the channels manually Change Channel Name Sound SettingsUnit can record and play back stereo sounds Press or Select Name Use this function to improve poor signal quality Improve Signal QualityPress Select Install or Adjust the settings Press to save the settings Channel Groups Reduce NoiseWatch Favourite Channel Use this function to reduce picture noise Set Screen Language Set Aspect RatioSet Wide Screen Format Display if no Wide Screen Signal is Received Set Picture Mode Additional Picture Settings Set Individual Colour ChannelsPress to open the desired menu Adjust Individual Audio Frequencies Audio SettingsSet volume Set Balance Is a registered trademark Adjust Medium and Low Frequencies Enter the time using the key pad Press to save the settings Set Sound SourceSet Time Use this function to set a time when the unit turns on Set Switch on TimeSet Time by Station Press Select on or OFF or Automatic Switch off Set Switch off TimeAutomatic Switch off if no Signal is Received Use this function to set a time when the unit turns off Switch Off if no Key is Pressed Set On-Screen DisplaySet Duration Child Lock Set TransparencyActivate Child Lock Settings for the Computer Restore DefaultPress Press the mains switch on the back of the unit Set Characters for Teletext Set Volume WatchingWatch Current Television Program Select Source Recall a Favourite ChannelSelect Input Press Press repeatedly until you select the desired channel Watch Two Programs at the Same Time PIP Set Picture-in-Picture Position Set Picture-in-Picture SizeTeletext Use this function to set the size of the small picture Adjust Picture Size while Watching Set Picture Mode while WatchingStill Picture Show Time Set Sound while Watching Set Sound Effect while WatchingSet Stereo/Mono while Watching Use this function to set the sound effects Cleaning and Troubleshooting See chapter Restore Default on Cast in black and white. Adjust the colour settingsCheck wether the connecting cable is properly connected to Cannot be displayed. Change the settings in the computer Pixel Type Technical specificationsPb/Pr 1360 x Memo Memo Memo