EnGenius Technologies ECB-1220R user manual Snmp Settings

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1

ƒIP Address: Enter the IP address.

ƒSubnet Mask: Enter the subnet mask for the IP address.

ƒDefault Gateway: Enter the IP address for the default gateway.

ƒDHCP: Select Server from the drop-down list since this device is the DHCP server. This device will distribute the IP addresses to the clients associated.

ƒDHCP Client Range: Enter the first and last IP address of the range. Make sure that the range is on the same subnet as the device. You may click on the Show Client button to view a list of IP addresses that were distributed.

ƒClick on the Apply Changes button to confirm the changes. This device will automatically restart once these changes have been applied.

SNMP Settings

ƒSNMP Daemon: Select Enable if you would like to use the SNMP feature.

ƒRead-Only Community Name: Specify the password for access the SNMP community for read only access.

ƒRead-Write Community Name: Specify the password for access to the SNMP community with read/write access.

ƒSend SNMP Trap: Select Enable if you would like to receive SNMP traps.

ƒSend Trap To: Specify the IP address that would receive the SNMP traps.

ƒClick on the Save Settings button once you have modified the settings.

57