EnGenius Technologies ECB-1220R user manual Password, TCP/IP Settings

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1

ƒClick on the Save button to save the current settings to a file on the local disk.

ƒClick on the Browse button to select the settings file and then click on the Upload button to load the previously saved settings.

ƒClick on the Reset button to reset the device to its factory default settings. Click Restart to reboot the device.

Password

ƒClick on the Password link under the Management menu. This option allows you to create a user name and password for the device. By default, this device is configured without a user name and password. For security reasons it is highly recommended that you create a user name and password.

ƒEnter a user name into the first field.

ƒEnter a password into the New Password field and then re-type the password into the Confirmed Password field. Then click on the Apply Changes button.

ƒBy clicking on the Reset button, the user name and password fields will become blank indicating that the username and password has been disabled.

TCP/IP Settings

ƒClick on the TCP/IP Settings link on the navigation drop-down menu. You will then see the LAN Interface and SNMP option. The options are described in detail below.

26