EnGenius Technologies ECB-1220R user manual Advanced Settings

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1

ƒBand: Select the IEEE 802.11 mode from the drop-down list. Options available are 2.4GHz (B), 2.4GHz (G), or 2.4GHz (B+G). Select the appropriate mode based on the type of wireless network. For example, if you are sure that the wireless network will be using only IEEE 802.11g clients, then it is recommended to select 2.4GHz (G) instead of 2.4GHz (B+G) which will reduce the performance of the wireless network.

ƒSSID: The SSID is a unique named shared amongst all the points of the wireless network. The SSID must be identical on all points of the wireless network and cannot exceed 32 characters.

ƒChannel: Select a channel from the drop-down list. The channels available are based on the country’s regulation. When selecting Infrastructure mode, a channel is not required, however, when selecting Adhoc mode, you must select the same channel on all points.

ƒShow Active Clients: Click on this button to view a list of associated clients.

ƒClick on the Apply Changes button to confirm the changes. This device will automatically restart once these changes have been applied.

ƒEnable Universal Repeater Mode: Select Enable to activate Universal Repeater Mode and type below SSID for extended wireless interface.

Advanced Settings

ƒClick on the Advanced Settings link under the Wireless menu. On this page you can configure the advanced settings to tweak the performance of your wireless network. Options available are: fragmentation threshold, RTS threshold, beacon interval, output power, preamble type, broadcast SSID, IAPP, and 802.11g protection.

62