EnGenius Technologies ECB-1220R user manual Access Point/Router Mode Config, Logging

ECB-1220R 11b/g Wireless Client Bridge/AP/Router/Repeater Version 1.1

4Since this device is currently in Access Point mode, the AP radio button will be selected by default.

5Select the Bridge or Bridge Router radio button to and then click on the Apply Change to switch the operation mode to Bridge.

6Wait for about 1 minute and the device will automatically restart into Bridge mode.

4 Access Point/Router Mode – Config

Logging In

ƒTo configure the AP through the web-browser, type IP address (default: 192.168.1.2) into the address bar of the web-browser and press Enter.

ƒMake sure that the ECB-1220R and your computers are on the same subnet. Refer to Chapter 2 in order to configure the IP address of your computer.

ƒUsername：admin; Password：admin

14