Rack Mounting
Mid-Mount
The RBT‐8110 ships with a mid‐mount accessory kit. Figure 2‐2 shows the RBT‐8110 installed in a rack, with the front mount attached, and a mid‐mount placement example.
To attach the chassis to the rack, perform the following steps:
1.Use the two mounting holes closest to the center of the chassis for more balanced mounting position.
2.Use the M4 screws (2 screws for each side) to secure the center mounting bracket to the chassis. Use the M5 screws to secure the chassis to the post of the rack.
