1(PILOT WILL NOT LIGHT

NO SPARK

A) IGNITION SYSTEM

Make sure that wires are not broken, frayed and that all connections are tight at both the piezo ignitor and electrode.

Make sure that ceramic on the

electrode is not broken. Carefully try to spin the porcelain.

Make sure a 1/8” (3.175mm) gap is maintained between electrode and pilot hood.

SEE PAGE 2 FIGURE 1.

Make sure the piezo ignitor is

not loose.

Make sure piezo ignitor is working properly. Place a screwdriver next to ignitor, and press ignitor. If it sparks, OK.

Replace with only manufactures parts

IF IT DOES, replace

electrode.

Replace electrode.

Retighten hex nut on back

of the ignitor and make sure bracket is secure on the valve.

IF IT FAILS, replace piezo

ignitor.

 

 

 

 

 

 

Sherwood Industries Ltd.

ENVIRO

PAGE 1

 

 

 

 

 

 

Page 3
Image 3
Enviro C-10100 service manual 1PILOT will not Light No Spark Ignition System, See page 2 Figure