If you start EPSON Scan! II before turning on your scanner, the software may not work properly.

Using EPSON Scan! II

EPSON Scan! II is a TWAIN-compliant application supplied with EPSON TWAIN (Macintosh only) in case you choose not to install Presto! PageManager, Adobe PhotoDeluxe, or another TWAIN-compliant program for scanning. For best results, however, scan with one of the TWAIN-compliant applications that came with your scanner instead of EPSON Scan! II.

Before scanning, make sure you’ve installed the EPSON TWAIN software (as described in the Scanner Basics book).

These sections tell you how to use EPSON Scan! II:

Scanning with EPSON Scan! II

Exporting Images with EPSON Scan! II

Scanning with EPSON Scan! II

Follow the steps in this section to scan using EPSON TWAIN with EPSON Scan! II.

1Make sure you’ve set up and turned on the scanner, and placed the document you want to scan on the document table. See the Scanner Basics book for instructions.

2To start EPSON Scan! II, select the EPSON Scan! II icon in the EPSON Scanner folder.

Using the EPSON TWAIN Utilities

Page 56