4. Attach the interface board cover with the two screws you removed in step 5.

Note:

Do no attach the interface cover if an optional interface is

installed.

5.Reconnect any interface cables you removed.

6. Reinsert the optional font cartridge and lower paper cassette if you have these options.

7.Be sure the power is turned off; then plug the power cord into an electrical outlet.

Printing a status sheet

To print a status sheet to verify that EpsonScript is properly installed:

1.Turn on the printer.

2.Press the Menu button to enter SelecType.

3.Press the Menu button several times until TEST MENU appears on the display.

4.Press the Item button; you should see PS STATUS SHEET on the display.

5.Press the Enter button The printer prints the status sheet, showing the current EpsonScript printer settings.

6.Press the On Line button to put the printer back on line.

1 - 8 Setup