The EpsonScript Macintosh driver allows you to control general printer settings as well as settings specific to PostScript emulation. This chapter describes only those settings specific to PostScript emulation.
You do not normally need to change the EpsonScript settings. The default values are appropriate for most Macintosh environments.
However, if you need to, you can access the EpsonScript driver settings by first selecting Page Setup or Print from the File menu of your software program and then choosing the Options button. This brings up the following dialog box:
The menus that allow you to access additional printer settings are listed to the left.
Note:
This chapter assumes you are using EpsonScript with an ActionLaser 1600 printer. If you have another printer, the Options dialog box may differ and not all settings described in this chapter will be accessible.