Software Installation

This chapter describes how to install the EpsonScript driver and utilities for both the Macintosh and PC environments. See the procedure that applies to you.

Installing the Macintosh Driver

To install the EpsonScript drivers and screen fonts on your Macintosh, you first need to run the EpsonScript Installer program. Then select the EpsonScript driver in the Chooser.

Running the EpsonScript Installer program

The Installer utility for the Macintosh driver has both an easy and a custom installation.

The easy installation installs all EpsonScript files and screen fonts that are not already installed on your Macintosh. Normally, you should use the easy installation since this ensures that all necessary files are copied and that the Macintosh environment is modified to give you the full benefit of the EpsonScript option.

The custom installation installs only the files you specify. You might want to use the custom installation if you are low on disk space and want to install only those files that are absolutely required. However, if you have enough disk space, it is recommended that you use the easy installation.

To install EpsonScript on your Macintosh:

1. Turn on your Macintosh if it is not already on Exit any Macintosh programs you are currently running.

2-2 Installing the Drivers and Utilities