2.Select a PostScript-formatted file.

3.Click Open. This sends the file to the printer.

4.Click Cancel to close the dialog box.

Renaming the printer

By default, the printer isassigned a name when you install it. However, if you are installing the printer on a network that includes other printers, it is highly recommended that you assign it a unique name.

1.Bring up the EpsonScript Utility and select your printer using PostScript Printers and AppleTalk Zones.

2.Click the Rename button. This brings up the following dialog box:

New name for "ActionLaser 1600”:

Doc Department

Printer status :

Note: Not all printers change their names immediately. You may need to

writ a minute or even turn the printer off and on before clicking the ‘Update Lists’ button on the main window to update the zone/printer lists.

3.Enter a unique name for your printer. The name can be up to 31 characters in length.

4.Click OK.

After you rename the printer, you need to reselect it in the Chooser.

3-16 Using EpsonScript in a Macintosh Environment