This dialog box contains two settings that affect EpsonScript: Print To and Send Header with Each Job.

PM to Encapsulated PostScript File

This setting saves a document as a PostScript-compatible file. When you choose OK from the Print dialog box and select Encapsulated PostScript File, EpsonScript prompts you for a filename and saves the print data to a file. Normally you should use the Print to File option in the Print dialog box to specify that the print data be stored to a file.

Send Header with Each Job

This setting specifies that EpsonScript attach header information with each file. By default, Send Header with Each Job is enabled to ensure that all header information is included with the file. Including header information is especially important when saving to a diskette or when printing to a shared network printer.

If your computer is connected directly to the printer, you can save printing time by turning off Send Header with Each Job. However, if you move the file to another location and then print, you will lose the header information

Using EpsonScript in a Windows Environment 4-5