Using Multi-Screen Display

30

 

 

Procedure

A Start Windows on the computer, then select "Start" - "Programs" (or "All Programs") - "EPSON Projector" - "Add/Remove Epson Virtual Display".

The "Add/Remove Epson Virtual Display" screen is displayed.

B Select the virtual display you want to use.

Up to four monitors can be added. In this case, a single virtual display is to be used, so select one. 3When, for example, using three projectors, such that you have to set multiple virtual displays, only select as many displays as is necessary.

Any one of the displays can be selected.

C Click "OK".

When you click "OK", the drivers for the virtual display are enabled. At this point, it is normal for the display to flicker. Wait for the "Add/Remove Epson Virtual Display" screen to close.

f Virtual display arrangement

After starting EMP NS Connection, the setting up of the virtual displays varies between Windows and the Macintosh. The procedures are explained separately, below.

For Windows, follow the procedure below. For the Macintosh, go to s p.33.

Procedure

For Windows

A Select "Start" - "Programs" (or "All Programs") -

"EPSON Projector" - "EMP NS Connection". EMP NS Connection starts.