Sending Scenarios

D When transfer is complete, a message is displayed confirming whether to perform autorun setup. If you want to set autorun, click "OK" and continue with the next step. Otherwise, click "Cancel" to close.

All scenario files within the destination drive are displayed in the scenario list on the left in the format "Folder name/File name".

E When using autorun

To set a scenario to run automatically when the projector power is turned on, click the target scenario name in the scenario list, and click " ".

The scenario is displayed in the autorun scenario list on the right and set as an autorun file.

A scenario file in a folder with deep hierarchy or with a long folder name cannot be selected.

80

When projecting a scenario repeatedly

To start projecting from the first scenario again once projection of all scenarios in the "Autorun Scenario List" is complete, select "Revive" check box.

Autorun can also be set by selecting "Scenario Option" - q "Edit Autorun".Autorun setting cannot be specified in EasyMP for PC Free.

If there are two or more files set for autorun, they are played back in order from the top on the "Autorun Scenario List".

F When the scenario for autorun is set, click "OK". G Remove the USB storage device from the computer.

See the computer's user's guide for the removal method.

H After finishing transferring your scenario, connect the USB storage device to the projector and start projection using PC Free. s p.56