Epson 1725, 1735W 90

Troubleshooting						90


			Check		Remedy
	Is the network cable connected correctly?				Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
					properly.
		For Wired LAN			properly.

	fCannot connect in "Advanced Connection Mode" or wired LAN connection

			Check		Remedy
	Are the SSID for the computer, access point, and				Set the computer, the access point, and the projector to the same SSID. See the projector User’s Guide for
	projector different?				more information.

	Are the WEP keys set properly?				When selecting WEP from "Security", set the access point, the computer, and the projector to the same WEP
					key. See the projector User’s Guide for more information

	Are the connection denial functions, such as MAC				Set the projector to allow connections from the access point.
	address restrictions and port restrictions, set correctly
	at the access point?

	Are the IP address, the subnet mask, and the gateway				When not using a DHCP, adjust each setting. See the projector User’s Guide for more information.
	address for the access point and the projector set
	correctly?

	Are the access point and the projector's subnet				Select "Manual search" from EMP NS Connection, specify the IP address, and connect.
	different?				s p.40

	fThe Slide show cannot be displayed on the desired display when using the multi-screen display.

			Check		Remedy
	Are you using PowerPoint 2002 or an earlier version?				To set and use two or more virtual displays, use PowerPoint 2003, or limit the number of virtual displays to
					one before displaying the Slide show.
		For Windows			one before displaying the Slide show.
		For Windows

fApplications are no longer displayed from the computer's screen when using the multi-screen display.

	Check		Remedy
Is another application running on the virtual display?			When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. If this
			happens, set "EPSON Virtual Display" to "Off" in "Screen properties".
	For Windows
	For Windows

Contents

Operation Guide Contents Contents Setting Image and Movie File Display Conditions and Operation Mode Preparing a Scenario (Using EMP SlideMaker2) Scenario Summary Turning a PowerPoint File into a Scenario Converting all files in a single operation without starting up EasyMP Summary Notes When Using a Wireless LAN Notes When Using a Wireless LAN International Travel Precautions Wireless Telegraphy Act Regulations Notes on Security when Using Wireless LANs Connecting with Quick Wireless Connection f Projection method f Ending the Projection f General settings Tab f Adjust Performance Tab Installing the Software Installing the Software E When the License Agreement screen is displayed, click "Yes G Click "Finish" to complete the installation C Double-clickthe "Installer for Mac OS X" icon in the "EPSON" window D Click "Finish" to complete the installation Connecting with EMP NS Connection Overview of EMP NS Connection • Two Connection Modes and their Main Functions Preparing to Connect Connecting to a Projector on a Network Overview of EMP NS Connection f "Quick Connection Mode" (only when the "Wireless LAN unit" is installed) f "Advanced Connection Mode f Main functions Steps for connecting Install EMP NS Connection on the computer to be connected sp.10 p.16 Start EMP NS Connection on the computer and connect with the projector s p.17 Preparing to Connect f For Windows f For Macintosh Connecting to a Projector on a Network and Projecting Connecting to a Projector on a Network and Projecting When changing presenters and so on, and when qcontinuously connecting from another computer, start EMP Using the Connection Screen Page Using the Toolbar Page Is the indicator on the Reinstall the wireless LAN wireless LAN unit unit When The Target Projector is Not Found Are any of the supplied utilities operating from the computer's wireless Yes LAN unit Contact Epson as described in the User’s Guide Disconnecting Convenient EMP NS Connection Functions Projecting Only a PowerPoint Slide show (Presentation Mode) Projecting Movies from a Computer (Movie Sending Mode) Projecting Only a PowerPoint Slide show (Presentation Mode) Projecting Movies from a Computer (Movie Sending Mode) Projecting Movies from a Computer (Movie Sending Mode) D Select the movie file you want to play back and then click "Open E Use the operation buttons below to play and stop the movie files F Click "Close" to end Movie Sending Mode Using Multi-ScreenDisplay f Enable the virtual display driver (Windows only) f Virtual display arrangement B Select the "Use multi-display"check box C Click "Display properties D Click the "Settings" tab E Drag the displayed monitor icon and place it where desired • When an external monitor is connected as a secondary monitor, the image for that screen cannot be projected • Depending on the hardware, the number of the secondary monitor may be other than "2". When the monitor icon is C Click "Display preferences Page F Drag the displayed monitor icon and place it where desired G Close the display setting screen Allocating the image to be projected A Open the file to be projected The allocated image is projected virtual display B Click "Connect Page Connecting to a Projector on a Different Sub-net Connecting to a Projector on a Different Sub-net Searching by Specifying the IP Address and Projector Name Connecting to a Projector on a Different Sub-net B Enter the IP address or the projector name for the projector you want to connect to, and click "OK A Click "Manual serch" on the EMP NS Connection projector selection screen projectors you can narrow the search field by using SSID Performing a search with a profile Performing a search with a profile B Enter a profile name and then click "Add p.44 Searching by Specifying a Profile A Click "Profile" on the EMP NS Connection projector selection screen B From the menu that is displayed, select the projector you want to connect to Managing a Profile A Click "Set options" on the EMP NS Connection's main screen B Click "Edit profile C Edit the contents registered in the profile Profile Item Function Information on selected profile D Click "OK Setting the EMP NS Connection Operation Using Set Options Using Set Options Using Set Options Adjust Performance Tab qWhen you click on the toolbar, only the Adjust performance tab is displayed Using a Computer to Set Up, Monitor and Control Projectors Changing Settings Using a Web Browser (Web Control) Using the Mail Notification Function to Report Problems Changing Settings Using a Web Browser (Web Control) f Entering the IP address of the projector f Items in the configuration menu that cannot be set by the web browser Using the Mail Notification Function to Report Problems Management Using SNMP Presentations Using PC Free Files that can be Projected Using PC Free and Saving PC Free Basic Operations Projecting Scenarios Files that can be Projected Using PC Free, and Saving f Projecting images and movies stored on a USB storage device fProjecting a PowerPoint slide show without connecting to a computer PC Free Basic Operations f Starting PC Free PC Free Basic Operations When a USB •Some JPEG files may be displayed as file icons instead of thumbnails f Closing PC Free Rotating the Image A Play images or scenarios in JPEG format, or perform a slide show B While projecting a JPEG image, press the [] or the [] button Projecting Scenarios f Basic scenario editing Projecting Scenarios D Move the cursor to the desired position, and then press the [Enter] button Playing a Scenario A Start PC Free. s p.56 B Use the [] buttons to position the cursor on the target scenario file C Press [Enter] • You can rotate JPEG format images in the scenario while Projecting image and movie files Projecting image and movie files •JPEG format images can be rotated during projection. q s p.59 Fast-forward:Press the [ ] button Rewind: Press the [ ] button Projecting all Image and Movie Files in a Folder in Sequence (Slide show) p.64 Setting Image and Movie File Display Conditions and Operation Mode B Select "Option" in the displayed menu and press the [Enter] button C Make your desired settings on the displayed option screen D Use the [] buttons to position the cursor over "OK" and press [Enter] Preparing a Scenario (Using EMP SlideMaker2) Scenario Summary Files that Can be Included in Scenarios Turning a PowerPoint File into a Scenario Converting all files in a single operation Scenario Summary Files that Can be Included in Scenarios Turning a PowerPoint File into a Scenario Converting all files in a single operation without starting up SlideMaker2 • Note that the following is not possible if EMP SlideMaker2 has been started. Close EMP SlideMaker2 first • After the scenarios have been incorporated, they will Converting all files in a single operation without starting up SlideMaker2 Check the message and click "Start Once the Slide show reaches the end, click the screen Starting up SlideMaker2 and Converting Files f Scenario creation procedure Starting up SlideMaker2 and Converting Files qThe setting details can be changed in the "File "Properties" menu of EMP SlideMaker2 qRefer to the EMP SlideMaker2 help for details on the EMP SlideMaker2 menu functions Including PowerPoint Files in Scenarios converted to scenarios f Including all slides in a PowerPoint file E Drag and drop the PowerPoint file from the file G Click "Start window to the scenario window H When the Slide show ends, click the screen F Click "Continue f Including only selected slides while checking thumbnails Including Image and Movie Files in Scenarios A Click the target folder in the folder window B Click the icon of the image file in the file window C Double-clickthe icon of the target image file in the file window qTo deselect all of the selected files, click the white area outside the icon f Adding files and slides f Deleting a slide f Changing the order of slides Sending Scenarios Sending Scenarios E When using autorun When projecting a scenario repeatedly •Autorun can also be set by selecting "Scenario Option" - q "Edit Autorun •Autorun setting cannot be specified in EasyMP for PC Free Cases Like These Cases Like These Setting Animations A Start EMP SlideMaker2 B Select "Scenario Option" - "Animation Replacement Candidate C Select the set animation A Right-clickin the target cell or the animation, and select "Cell Properties Appendix Connection Limitations Troubleshooting Software Requirements Connection Limitations f Limitations when projecting from Windows Photo Gallery f Limitations in Windows Aero Troubleshooting Troubleshooting fThe projector is not found when EMP NS Connection is started For Wireless LAN Quick Connection Mode Page fThe mouse cursor is not displayed on the computer's screen fCannot use a PowerPoint file with EMP SlideMaker2 fError message when starting up EMP NS Connection Page fError message when starting up EMP SlideMaker2 fCannot project with Quick Wireless Connection fTrouble with the USB key for Quick Wireless Connection fE-mailis not sent even if an abnormality occurs in the projector Software Requirements General Notice: NetNucleus WPA NetNucleus Software Copyright: GNU LESSER GENERAL PUBLIC LICENSE GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION Page Page Page Page NO WARRANTY For embedded multimedia software: For MPEG-4ASP: For MPEG-4AVC: For WMV/WMA (Microsoft):