
4.Locate one of the power supply cables that lead from the power supply (behind the horizontal drive bays). The cables are labelled Pl, P2, and P3; you can use any one. As shown below, the end of the connector has two notched comers.
power supply cable | power supply socket |
notched | notched |
corners | corners |
The power supply socket is on the back of the hard disk drive, next to the cable you just connected. The socket also has two notched comers, as shown above.
5.Pull the cable through the lower opening in the right side of the subassembly so it reaches the drive socket easily. Align the connector with the socket so that the notched comers on the connector line up with the notched comers of the socket, as shown below.
notched comers
Installing and Removing Disk Drives |