7.Secure the drive to the bracket with the retaining screw.

Now you can replace the subassembly and the computer’s cover. See Chapter 5 for instructions.

Removing a Hard Disk From the Vertical Position

You need to remove the hard disk drive from the vertical position in the following cases:

0 You are replacing the drive

0You are adding a second drive (either another hard disk drive or a diskette drive) in the lower horizontal position.

Follow these steps:

1.Remove the retaining screw securing the hard disk drive mounting plate to the subassembly and set it aside.

r e t a i n i n g s c r e w - ?

2.Tilt the hard disk drive slightly to the right and lift it off the subassembly.

Installing and Removing Disk Drives 7-17