
The SETUP program lets you select the type of hard disk drive(s) installed in your computer. If you have two hard disk drives, the first one is C and the second one is D. Be sure to choose the correct setting for both drives.
Follow these guidelines:
Cl If your system does not have a hard disk, select Not
i n s t a11ed for drives C and D. If you have only one hard disk drive, select Not i nsta11ed for drive D.
Ll If your computer came with an Epson 100MB hard disk drive (or if you installed this drive yourself), select number 60 for drive C.
DIf you have installed another type of hard disk drive, you need to select the drive type number that matches your drive. See “Hard Disk Drive Types” below.
H a r d D i s k D r i v e T y p e sIf you have installed a hard disk in your computer that is not the standard Epson 100MB drive (type 60), you need to select the correct type number to match your drive.
The following table lists the types of standard hard disk drives you can use in your computer. Check this table and the documentation supplied with your hard disk to find the correct type number for your drive. (Your drive’s documentation should list all the parameters necessary to identify it in this table.) If none of the types listed match your drive, see “Defining your own drive type,” below.
Running the SETUP Program