0If you have a composite color monitor, such as a color television with a video input, try selecting Co1or 80x25. If you find that the monitor’s resolution is poor, run SETUP again and select Co1or 40x25.

If you have two display adapters of different types, select the setting for the one you want to be your primary display adapter. The other one is your secondary adapter.

Note

If you have installed an EGA or VGA display adapter card, or another type of card that you want to be the primary display adapter, you must set jumper Jl on the main system board to disable the built-in VGA interface.

If you install one type of display adapter card and then change the type of monitor you are using (from color to monochrome, or vice-versa), you also need to set jumper J3. If you have two types of cards, set the jumper to match the monitor that is your primary display. See Chapter 6 for instructions on changing jumper settings.

Setting the Keyboard Test function

There are two options for the keyboard test function: Installed or Not installed. Select Installed if you want the computer to test the operation of the keyboard each time you turn it on or reset it. Select Not i ns tall ed if you want the computer to skip the keyboard test to save time as you boot the system.

Running the SETUP Program 2-9