2 Removing the Protector Cord

If you have a SW-inch diskette drive, there is a protector card in the diskette slot. This card is inserted at the factory to protect the read/write heads in the drive. To remove it, flip the latch up to pop the card out part way, as shown below; then pull it out.

(If you have a second 51/4-inch diskette drive, be sure to remove the protector card from it.)

Save the protector card. If you transport your computer, you may want to insert the card into your diskette drive prior to shipping. This will protect the read/write heads during the shipping process.

Setting Up Your System

1-3