Connecting a Component Video Cable

If your video source has component (blue, green, and red) connectors, you can use them to project a higher quality video image. However, you’ll need a VGA-to-component video cable, which is available from EPSON; see page 7.

Before starting, make sure the projector and your DVD player or other video device are turned off.

1.Connect the VGA end of the cable to the projector’s

Computer 2/Component Video port.

2.Connect the red, green, and blue leads at the opposite end of the cable to the corresponding connectors on your video source.

3.If your video source has RCA audio, you can use the A/V cable to connect to the projector’s Audio L (white) and R (red) jacks.

Computer 2/

Component Video port

VGA-to-component video cable

A/V cable

If your video source has a stereo mini-jack instead of RCA jacks, you can use a stereo mini-jack cable (not included). Connect it to the Audio 1 jack on the projector.

4.If the image doesn’t display properly, you may need to change the Comp2/YCbCr option in the projector’s Setting menu (see page 56).

18Setting Up the Projector