3.Press the Power button again. The power light flashes orange for about a minute and a half as the projector cools down. When the projector has cooled, the orange light stays on and the exhaust fan shuts off.

If you want to turn the projector on again, wait until the orange light stops flashing. Then press the Power button.

4.If you extended the front foot, press the foot adjust button to retract it.

5.Replace the lens cap and unplug the power cord.

6.If you’re using a VCR or other video source, turn it off after you turn off the projector.

7.Disconnect all equipment, and store the projector in a protective case.

caution

To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange.

Using the Projector 31