

The lamp is cooling down. Wait until the light turns off and then press the Power button to turn on the projector.
The
Make sure the power cord is connected securely both at the power outlet and the projector. If you have just replaced the lamp, make sure the cover is securely fastened.
Solving Problems with the
Image or Sound
No image appears on the screen.■Check that the P power light is green, not flashing, and the lens cap is off.
■The projector may be in sleep mode. If the P power light is orange, press the Power button to turn the projector on.
■If the power was switched off and then on again, the projector may still be cooling down. Wait until the power light stops flashing and remains orange; then press the Power button again.
■Try pressing the Power button on the remote control.
■Make sure the Brightness setting on the Video menu is correct. See page 48 for more information. Try selecting the Reset All setting to return all setup menus to their default values.
■Press the A/V Mute button to make sure the picture has not been turned off temporarily.
■The attached computer may be in sleep mode or displaying a black screen saver. Try pressing a key on the computer.
Solving Problems 73