note
Macintosh configurations vary. See your computer manual for the location of the ports needed to connect your projector. Older models may require a Macintosh adapter set, which you may purchase from EPSON; see page 7.
Connecting to a Desktop Macintosh
You can connect the projector to any desktop Macintosh. This section includes instructions for the following:
■Connecting the computer cable
■Connecting the mouse cable (if you want to use your remote control as a mouse or use USB audio)
■Connecting the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect. Before beginning, make sure the projector and computer are turned off. If you need help with positioning the projector, see page 10.
Connecting the Computer Cable
1.Disconnect the monitor cable from the video port on the back of the Macintosh.
2.If you’ll be viewing the display on your computer monitor as well as the projector screen, connect the monitor cable to the projector’s Monitor Out port, as shown.
Monitor
Out port
88Appendix A: Connecting to Additional Equipment