Macintosh desktop adapter (if needed)
4. Connect the other end of the computer cable to the video port on the Macintosh. If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 7).
To use the adapter, remove its cover as shown and set its DIP switches according
to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions.
Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with
the adapter) into the video port on your Macintosh.
5. Tighten the screws on the connectors.
3.Connect one end of the computer cable to the projector’s
Computer 2/ Component Video port, as shown.
Computer2/Component Video port
Appendix A: Connecting to Additional Equipment 89