Controlling the Projector

While giving your presentation, you may want to switch between picture sources, adjust the volume, or temporarily turn off the picture and sound. Follow the instructions below to access theses features from your projector’s control panel. You can also access these features, plus many others, using the remote control as described in Chapter 3.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or video source, you can use the buttons on the control panel (or remote control) to switch between the different sources.

On the projector’s control panel, press the Computer/YCbCr button to switch between computer sources and component video. Press the Video button to switch between standard (composite) video and S-Video.

After you select a source, the screen goes dark for a moment before the image appears.

Power Help

Computer/YCbCr Video

Source

MenuEsc

Sync+

Tracking - Auto Tracking +

Adjusting the Volume

If your presentation includes sound, you can adjust the volume from the projector’s control panel.

■To increase the volume, press on the right side of the Volume button.

■To reduce the volume, press on the left side of the Volume button.

A/V Mute button

Using the Projector 29