Refer to the following table for a complete description of the projector’s status lights and their meaning:
Status lights
Light | Status | Description | ||
|
|
|
|
|
|
|
| orange | The projector is in sleep mode. You can unplug it or press the Power |
|
|
|
| button to turn it on. |
|
|
|
|
|
|
|
| flashing green | The projector is warming up. Wait for the image to appear. |
|
|
|
|
|
|
|
| green | The projector is operating normally. |
|
|
|
|
|
|
|
| flashing orange | The projector is cooling down. You can’t turn it back on (and you should |
|
|
|
| not unplug it) until the light stops flashing and remains orange. |
|
|
|
|
|
|
|
| flashing red | Power is cut off because of an internal problem. Remove the power cord |
|
|
|
| and contact EPSON for help. |
|
|
|
|
|
|
|
| red | The lamp is burned out. Replace it as described on page 64. |
|
|
|
|
|
|
|
| flashing orange | The lamp is almost burned out. Make sure you have a replacement lamp |
|
|
|
| ready. |
|
|
|
|
|
|
|
| flashing red | There is a problem with the lamp, power supply, fan, or circuit. If |
|
|
|
| necessary, replace the lamp as described on page 64. |
|
|
|
|
|
|
|
| flashing orange | The projector is too hot. Make sure the temperature surrounding the |
|
|
| ||
|
|
|
| projector does not exceed 95 °F (35 °C) and there is plenty of space |
|
|
|
| around and under the projector for ventilation. |
|
|
|
| The air filter may be clogged. Clean or replace it as described on page 63. |
|
|
|
|
|
|
|
| red | The projector is overheating, which turns the lamp off automatically. Wait |
|
|
| ||
|
|
|
| until the cooling fan stops, then unplug the power cord. Plug the power |
|
|
|
| cord back in and press the Power button. Make sure the room |
|
|
|
| temperature is not above 95 °F (35 °C) and there is plenty of space |
|
|
|
| around and under the projector for ventilation. |
|
|
|
| The air filter may be clogged. Clean or replace it as described on page 63. |
|
|
|
| If the projector continues to overheat after you clean the air filter, the |
|
|
|
| problem may be caused by damage to the cooling fan or temperature |
|
|
|
| sensor. Contact EPSON for help. |
|
|
|
| Warning: Except as specifically explained in this User’s Guide, do not |
|
|
|
| attempt to service this product yourself. |
|
|
|
|
|
|
|
| flashing red | There is a problem with the cooling fan or temperature sensor. Turn off |
|
|
| ||
|
|
|
| the projector and unplug it. Contact EPSON for help. |
|
|
|
|
|
72Solving Problems