If the projected image isn’t square or has a “keystone” shape, do one or more of the following:
■If your image looks like 
or 
, you’ve placed the projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely. If you still can’t get a square image, press the left or right Keystone button on the projector’s control panel:
Menu | Esc | Menu | Esc | |
| Sync+ |
| Sync+ | |
Tracking - | Auto Tracking + | Tracking - | Auto Tracking + | |
Shift | Keystone | Shift | Keystone | |
Sync- | Sync- | |||
|
|
■If your image looks like 
or 
, press the top or bottom Keystone button to correct the shape of the image. After
correction, your image will be slightly smaller.
Menu | Esc | Esc |
| Menu | |
| Sync+ | Sync+ |
|
| |
Tracking - | Auto Tracking + |
|
| Tracking - | Auto Tracking + |
Shift | Keystone |
|
Sync- |
| |
| Keystone | |
| Shift | Sync- |
|
|
You can also perform electronic keystone correction using the projector’s Setting menu. See page 55.
Using the Projector 27