Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the projector, and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a signal or when you press the A/V Mute button. The image can be a company logo, slogan, photograph, or any other image you want to use.

Capturing the Image

Start by displaying the image you want to use. It can be an image from either a computer or video source such as a DVD player or digital camera. Then follow these steps to capture the image and transfer it to the projector:

1.Press the Menu button on the control panel or remote control. You see the menu screen.

2.Use the Sync– button (control panel) or the button (remote control) to highlight the User’s Logo menu, then

press .

3.When you see the screen shown at right, select Yes and press . A selection box displays over the image.

4.Use the Tracking and Sync buttons (control panel) or the button (remote control) to select the area of the image you want to use. Then press .

Fine-tuning the Projector 53