Follow these instructions to connect the projector to a video player or satellite receiver that has an RGB video output port using the VGA computer cable that came with the projector.
Before starting, make sure the projector and your DVD player or other video source are turned off.
1.Connect one end of the VGA computer cable to the
Computer1(Component) or Computer2(Component) port on the projector.
2.Connect the other end to the video port on your player.
3.To play sound through the projector, follow the instructions beginning on page 29.
If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select Computer 1 (RGB) or Computer 2 (RGB) as the source, depending on which port you used, after projection starts by pressing the Source Search button on the projector or the Comp1 or Comp2 button, depending on which port you used, on the remote control. See page 34.
Setting Up the Projector 27