note

You can make changes to many of the signal settings on the Signal menu. See page 58 for details.

Viewing Lamp Usage and Other Information

Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used.

1.Press the Menu button and select the Info menu. You see one of the following menus:

note

The lamp usage timer doesn’t register until you’ve used the lamp for at least 10 hours.

Computer (analog RGB, digital RGB, RGB

Video/Component video, YCbCr, YPbPr)

Video (Composite video, S-Video)

Lamp Hours

Displays the number of hours the lamp has been used. The life span of the lamp ranges from about 2000 hours in High brightness mode to about 3000 hours in Low brightness mode. If the number shown is close to 2000 or the information is displayed in red, make sure you have a spare lamp handy.

64Fine-tuning the Projector