Playing Sound Through the Projector

Your computer probably has its own sound system; however, it may not be adequate for your presentation. If you need more volume, you can connect a commercially available computer audio cable to take advantage of the projector’s built-in amplifier and speaker. You can obtain a computer audio cable (3.5-mm stereo miniplug) from a computer or electronics dealer.

1.Connect one end of the audio cable to the corresponding Audio jack on the projector.

2. Connect the other end of the audio cable to your laptop’s

headphone jack or audio-out jack, or your desktop’s speaker or audio-out port.

If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 32 for instructions.

note

If you’ve connected two computers to the projector, you can play sound from both. Connect the audio cable for the computer connected to the

Computer2(Component)

connector to the corresponding Audio jack on the projector. Connect the other end of the cable to the second computer.

Setting Up the Projector 23