Playing Sound Through the Projector
The projector has a built-in speaker with a maximum output of 5 W. You can play sound from your video equipment through the projector’s speaker if your video device has an audio output port.
For RCA-Style Audio Output Ports
Most video devices have an RCA-style audio output port. In this case, use a commercially available audio adapter to connect the projector to your video source:
1.Connect the 3.5-mm stereo miniplug end of the audio adapter cable to the Audio jack corresponding to your video source. For example, if you’ve connected your video device to the projector’s Video port, connect the adapter to the Audio jack next to it.
2.Connect the red and white plugs on the other end of the audio adapter cable to the corresponding color-coded audio output port on your video source.
If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 32 for instructions.
note
To play sound from a source, you must connect the audio cable to the correct audio jack.
When you switch the video source, the projector automatically plays sound from the new source.
