Nothing appears on the external monitor.
■Make sure the VGA computer cable is connected to your computer’s video port and the projector’s Computer1(Component) port. It will not work if you connected the computer cable to the projector’s
Computer2(Component) port.
■Make sure the cable from your monitor is connected to the projector’s Monitor Out port.
You see a blue screen with the message No Signal displayed.
■Make sure the cables are connected correctly, as described in Chapter 1.
■Make sure the power to your computer or video source is turned on.
■If you’ve connected a computer and one or more video sources, you may need to press the Source Search button on the projector or the Comp1, Comp2,
■If you’ve connected a laptop computer, make sure it’s set to display on an external monitor. See page 35.
If you’re using a PC laptop:
■Hold down the Fn key and press the function key that lets you display on an external monitor. It may have an icon such as
, or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop’s
manual or online help for details.
On most systems, the 
or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at
the same time.
86Solving Problems