9.Lower the lamp cover into place. (The opening should be almost covered, and the top of the cover should be flush with the top of the projector.) Then slide the cover closed and tighten the screw.

10. Reset the lamp timer as described in the next section.

Resetting the Lamp Timer

You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp warning message. Follow these steps:

1.Connect the power cable and turn on the projector.

2.Press the Menu button on the remote control or projector and select the Reset menu. Then press Enter. You see the following:

3.Select the Lamp-Hours Reset option and press Enter. You see the following:

note

Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used.

Esc button

Enter button Menu button

Maintaining and Transporting the Projector 79