Caution:
To avoid damage, always leave the ink cartridges installed when transporting the printer.
Transporting the Printer
If you move your printer some distance, you need to prepare it for transportation in its original box. Follow these steps:
1Turn on the printer and wait until the print head locks in the far right position. Then turn off the printer.
2Unplug the power cord from the electrical outlet. Then disconnect the interface cable from the printer.
3Remove any paper from the printer and remove the paper support.
4Push in the output tray extensions and close the tray.
5Repack the printer and attachments in the original box using the protective materials that came with it. See the Unpacking Sheet that was packed with your printer.
Be sure to keep the printer level as you transport it. If you notice a decline in print quality after transporting the printer, clean the print head (see Cleaning the Print Head); if output is misaligned, align the print head (see Aligning the Print Head).
Maintenance and Transportation | Page 134 |