Your printer switches to the modem port or won’t confirm on the printer port (Macintosh)
Possible cause | Solution |
|
|
Your Macintosh has | Make sure AppleTalk®is inactive. In the Chooser, select any Apple serial |
extension conflicts. | printer (such as the LaserWriter) and choose the printer port. Close the |
| Chooser, then reopen it and select the SC 740 icon and the printer port. |
| Then restart your system. |
|
|
You’re using an | Make sure you’re using a standard Apple System |
AppleTalk cable. | See Macintosh System Requirements for more information. |
|
|
Your printer icon doesn’t appear in the Chooser (Macintosh)
Possible cause | Solution |
|
|
Your Macintosh has | Disable Quick Draw GX in the Extensions Manager. Make sure EPSON |
extension conflicts. | Monitor3 and SC 740 are enabled, and then restart your Macintosh. |
|
|
The Chooser contains | Delete unused items or move them to the Extensions (Disabled) folder. |
too many items. | Then check for your printer icon in the Chooser again. |
|
|
Your application program can’t open your image file (Macintosh)
Possible cause | Solution |
Not enough memory | Highlight the program icon and select Get Info from the File menu, then |
is allocated to the | increase the memory allocated to the application. |
application. |
|
|
|
Troubleshooting | Page 154 |