The “SC 740 cannot be used” message appears (Macintosh )
Possible cause | Solutions |
The printer software | Remove and reinstall the printer software as described in Uninstalling |
has been corrupted. | Printer Software. Then, in the Extensions Manager, disable Quick Draw |
| GX, enable EPSON Monitor3 and SC 740, and restart. |
|
|
Your printer doesn’t print correctly as a remote printer (Windows NT)
Possible cause | Solution |
|
|
You may need to use a different network path and printer port.
Select a different printer port in the printer’s Properties window and enter the new network path to your printer at the DOS prompt. Then restart your computer. See your Windows NT documentation for instructions on changing the printer port and network path.
Fixing Paper Problems
To avoid most paper handling problems:
◗Use smooth,
◗Follow all loading and handling instructions included with the media.
◗Load the media with the printable side face up as described in the Start Here card and in Media Loading and Handling Guidelines.
Troubleshooting | Page 154 |