All the lights are flashing
Possible cause | Solution |
|
|
You haven’t removed all the packing material from the printer.
Remove the tape and other packing material following the instructions on the unpacking sheet.
An internal error may | Turn off your printer, wait a few seconds, and turn it on again. If the |
have occurred. | lights still flash or stay on, contact your EPSON dealer or see Where To |
| Get Help. |
|
|
The printer has finished charging the ink cartridge, but the P power light is still flashing
Possible cause | Solution |
|
|
The ink cartridge | Press down the clamp to lock it. |
clamp isn’t locked |
|
down. |
|
|
|
Packing material | Remove the tape and other packing material following the instructions on |
remains in the printer. | the unpacking sheet. |
|
|
The printer needs to | If the printer is not moving or making noise, but the Ppower light is still |
initialize. | flashing after more than 5 minutes, turn the printer off. If the light is still |
| flashing when you turn it back on, contact your EPSON dealer or see |
| Where To Get Help. |
|
|
Troubleshooting | Page 148 |