Caution:

Using an improperly shielded USB cable— especially a cable more than 6.5 ft.

(2 meters) long—may cause the printer to malfunction.

◗At least 16MB of RAM (20MB or more recommended)

◗At least 50MB of free hard disk space for storing images (100MB recommended)

◗13-inch RGB display or better

◗Double-speed CD-ROM drive (quad-speed or faster recommended) for installing the printer software

◗For serial connection, an ImageWriter® II serial cable or equivalent (8-pin mini DIN male/male, Belkin F2V024 recommended)

For USB connection to an iMac or Power Macintosh G3, a shielded USB “AB” interface cable, from Series A (computer) to Series B (printer) up to 6.5 ft. (2 meters) long

Windows System Requirements

To use your printer and its software with a PC, your system should have:

◗An IBM®compatible PC with at least a 386/25 MHz (for Windows 3.1x), 486/25 MHz (for Windows 95 or Windows NT® 4.0), or 486/66 MHz (for Windows 98) processor (Pentium®processor recommended)

◗DOS, Microsoft Windows 3.1x, Windows 95, Windows 98, or Windows NT 4.0

Introduction

Page 11