2Using the Projector

Once you have connected your projector to your other equipment (as described in Chapter 1), you’re ready to turn it on, adjust the image, and give your presentation. This chapter covers the following:

Turning on the projector and other equipment

Adjusting the image

Using the remote control

Zooming your image with the remote

Controlling the projector

Drawing on the screen

What to do when the lights flash

Using the on-screen help

Shutting down the projector

Turning On Your Equipment

Make sure your projector and other equipment are set up and connected correctly, as described in Chapter 1. Then turn on your projector, as described below, followed by any equipment you’ve connected to it. You can turn on your computer and video equipment in any order, but if more than one computer or video source is connected, you may have to switch to the desired source, as described on page 51.

Using the Projector 39