Assigning the Image to the No-Signal Message and/or A/V Mute Button

After your image is saved, you can set it up as the no-signal message and/or the screen that’s displayed when you press the A/V Mute button.

1.Press the Menu button on the control panel or remote control to display the Main menu (if not already displayed).

2.Select the Setting menu and then press the Enter button on the control panel or remote control.

3.Press the down arrow (control panel) or press down on the Enter button (remote control) to highlight No-Signal Msg.

4.Press the right arrow or use the Enter button to select Logo. This sets your image as the screen displayed when the projector is not receiving a signal.

5.If you want to set up your image as the A/V mute, use the down arrow or Enter button to move down to the A/V Mute option and select Logo.

6.Press Esc or the Menu button.

Now you can press the A/V Mute button on the control panel or the remote control to display the user logo or image. Press it again to turn off the logo.

74Fine-tuning the Projector