What To Do When the Lights Flash

power light

lamp light

temperature light

 

 

 

 

The lights on top of the projector indicate the projector’s status and

 

 

 

 

let you know when a problem occurs.

 

 

 

 

 

Light

Status

Description and action

 

 

 

 

 

 

 

 

orange

The projector is in sleep mode. You can unplug it to turn it off, or press

 

 

 

 

the Power button to turn it on.

 

 

 

 

 

 

 

 

flashing green

The projector is warming up. Wait for the image to appear.

 

 

 

 

 

 

 

 

green

The projector is operating normally.

 

 

 

 

 

 

 

 

flashing orange

The projector is cooling down. You can’t turn the projector on or

 

 

 

 

unplug it when the light is flashing.

 

 

 

 

 

 

 

 

red

Power is cut off because of an internal problem. Contact EPSON for

 

 

 

 

help.

 

 

 

 

 

 

 

 

flashing orange

The lamp is almost burned out. This is a good time to replace it. See

 

 

 

 

Chapter 4 for instructions.

 

 

 

 

 

 

 

 

flashing red

The lamp is burned out or there is a problem with the lamp power.

 

 

 

 

Replace the lamp, following the instructions in Chapter 4. (If replacing

 

 

 

 

the lamp does not solve the problem, contact EPSON.)

 

 

 

 

 

 

 

 

flashing orange

The projector is too hot. Turn it off and let it cool before using it.

 

 

 

 

 

 

 

 

 

 

 

red

The projector has turned off automatically because it has overheated.

 

 

 

 

 

 

 

Let it cool for a few minutes, then turn it back on. Make sure there is

 

 

 

 

plenty of space around and under the projector for ventilation. If it

 

 

 

 

continues to overheat, you may need to change the air filter. See

 

 

 

 

Chapter 4 for instructions.

 

 

 

 

 

 

 

 

flashing red

There is a problem with the cooling fan or temperature sensor. Turn

 

 

 

 

 

 

 

off the projector and unplug it. Contact EPSON for help.

 

 

 

 

 

56Using the Projector