warning
Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this User’s Guide. Refer all other servicing to qualified service personnel.
Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. Any dirt or smears on the lens will show up on your projected image.
You also need to periodically clean the air filter on the bottom of the projector. A clogged air filter can block ventilation needed to cool the projector and keep it from overheating.
The only parts you should replace are the lamp and air filter. If any other part needs replacing, contact your dealer or a qualified service person.
This chapter covers the following:
■Cleaning the lens
■Cleaning the projector case
■Cleaning and replacing the air filter
■Replacing the lamp
■Transporting the projector
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
■Use a canister of compressed air to remove dust.
■To remove dirt or smears on the lens, use
Maintaining and Transporting the Projector 77