Stop action

Turn off picture and sound

E@sy-MP

Display picture in picture

note

You can also select the P in P source through the projector’s Setting menu. See page 69.

Stopping Action

You can use the remote control to stop the action in your video or computer.

■Press the Freeze button to stop the action and keep the current image on the screen. The sound will continue.

■Press the Freeze button again to re-start it.

Turning Off the Picture and Sound

You can use the A/V Mute button on the remote control or control panel to turn off the image (and sound) and darken your screen. This is useful if you want to temporarily re-direct your audience’s attention without the distraction of a bright screen.

■To turn off the picture, press the A/V Mute button. The screen goes dark.

■To turn the image back on, press the button again.

You can also assign a user logo or image to the A/V Mute button so it displays on the screen whenever you press the A/V Mute button. See “Creating a Screen Logo or Image” on page 72.

Displaying Picture-in-Picture Video

You can open a small video window on your computer image, and view a video at the same time as your computer presentation. Make sure you have connected your VCR or other video source as described in Chapter 1.

1.Press the P in P button on the remote control. The screen may go dark for a moment, and then your video image appears in a small window on the screen. A menu appears in the lower left corner of the screen.

2.Press the side of the Enter button (or grasp it between your thumb and finger) to move the video window on the screen. You can use the E-Zoombutton to enlarge or reduce the video window.

52Using the Projector