Menu item | Description |
|
|
Reset | Returns all menu items to their initial factory defaults. |
| Select this item and then press the right arrow button (control panel) |
| or right on the Enter button (remote control) to display the |
| confirmation screen. |
| Select Yes and then press the Enter button to reset the menu. |
| If you change your mind, select No and then press the Enter button to |
| clear the confirmation screen without changing any settings. |
|
|
Video Menu (Image Source = Video)
The Video menu lets you make adjustments to the projected image. The following options are available when the image source is Video.
Note: The projector’s image source must be set to Video, and the video source (such as a VCR, DVD, or camcorder) must be connected and operating for you to access these menu options. (For example, the projector must actually be projecting the image from your video tape if you’re using a VCR.)
Menu item | Description |
|
|
Position | Select this item and then press the right arrow button (control panel) |
| or press right on the Enter button (remote control) to enter the screen |
| position adjustment mode. Then use the Enter button (remote |
| control) or up, down, left, and right buttons (control panel) to move |
| the screen position in the corresponding direction. |
| When you finish making adjustments, press the Esc button to return |
| to the Video menu. |
|
|
90 | 3 • Using the Projector Menus |