The following table describes these functions and how to use them.
Note: To program new effects for the Effects buttons, the ELP Link IV software must be running. Once you have pressed an Effects button, you can check the effect by using either your mouse or your remote control (if you’ve set up the remote control to function as a mouse and the computer is connected to the projector).
Function | Description and usage |
|
|
Free Line | Draws a free style line on the screen. |
| Press the Effects button assigned to this effect. Move the cursor |
| using the remote Enter button to draw the line. Press the Enter |
| button to set the line end position. To draw another line, move the |
| cursor away from the line you just created and press the Enter button |
| again to start the new line. |
Line | Draws a straight line on the screen. |
| Press the Effects button assigned to this effect. Then press the Enter |
| button once to define the line start position. Move the cursor using |
| the remote Enter button, and then the Enter button again to define |
| the line end position. To draw another line, move the cursor away |
| from the line you just created and press the Enter button again to |
| define the new line start position. |
Ellipse | Draws an ellipse (oval) on the screen. |
| Press the Effects button assigned to this effect. Then press the Enter |
| button once to define the start position of the ellipse. Move the |
| cursor using the remote Enter button. Then press the Enter button |
| again to define the end position of the ellipse. To draw another |
| ellipse, move the cursor away from the one you just created and |
| press the Enter button again to define the start position for the new |
| ellipse. |
|
|
108 | 4 • Using ELP Link IV |